Remora Ice | Premium Cold Plunge | Dual mode - Cold and Warm Water Therapy

Most cold plunges do one thing. The Remora Ice does both.

Drop the water down to 5°C for genuine cold-water immersion — no ice, no faff, just dial it in and go. Then, when you want the opposite, the same 700-litre tub climbs to 40°C, turning it into a full hot tub complete with massage jets and LED lighting. One tub, both ends of the ritual.

The engineering behind that range is what sets the Remora Ice apart from a standard ice bath and chiller setup. Instead of a chiller working alone against the cold, an integrated heat pump handles both heating and cooling — running up to 75% more efficiently than a traditional in-line heater, so you get real temperature range without the running costs piling up.

Two stainless steel jets keep the water circulating, breaking down the thermal layer that forms against your skin, so the temperature you set is the temperature you actually feel. Ozone and UV purification keep the water clean in cold mode, a single cartridge filter handles the rest, and you control temperature, lighting and scheduling from the Smart Life app on your phone.

Setup is refreshingly simple. The Remora Ice plugs straight into a standard UK socket via its pre-fitted RCD plug — no electrician, no dedicated circuit, no waiting on an installer. Unbox it, fill it, plug it in.

Cold to reset. Warm to unwind.

Key Features

• Integrated heat pump — cools to 5°C for genuine cold-water immersion, or heats to 40°C for full hot tub warmth, up to 75% more efficient than a traditional in-line heater
• 700-litre capacity — full-body immersion, built for one adult lying down
• Two stainless steel massage jets with built-in circulation — eliminates thermal barriers so temperature stays consistent throughout
• Ozone and UV purification plus cartridge filtration — clean water, less chemical maintenance in cold mode
• Wi-Fi enabled via Smart Life app — control temperature, lighting and scheduling from your phone
• Four corner LEDs plus internal lighting
• Aristech acrylic shell, stainless steel frame, ABS base, 15–20mm shell foam plus internal pipe insulation — built to hold temperature, not leak it
• Folding insulated cover included (50–70mm) — keeps heat or cold locked in between sessions
• Plug-and-play setup — standard 230V single-phase RCD plug, no electrician or dedicated circuit required
• Antifreeze and defrost protection as standard
• 2-year parts warranty, with 7 years cover on the compressor and heat exchanger

Specifications

• Dimensions: 2160mm (L) × 1050mm (W) × 750mm (H)
• Water capacity: 700 litres
• Capacity: 1 person, full lying immersion
• Shell: Aristech acrylic
• Frame: Stainless steel
• Cabinet: Polystyrene, maintenance-free
• Base: ABS
• Insulation: 15–20mm shell foam plus internal pipe insulation
• Heat pump: Integrated, cools to 5°C / heats to 40°C, ambient operating range −18°C to 43°C
• Efficiency: Up to 75% more efficient than a traditional in-line heater
• Jets: 2 stainless steel, with circulation system
• Filtration: 1 cartridge filter, ozone + UV purification
• Controls: Wi-Fi via Smart Life app, 4 corner LEDs plus internal lighting
• Power: 230V single-phase, RCD plug, plug-and-play — no electrician required
• Included: Mains cable and RCD plug, folding insulated cover, cartridge filter
• Warranty: 2 years parts, 7 years on compressor and heat exchanger

Setup

The Remora Ice arrives ready to use. It connects via a standard 230V socket using its pre-fitted RCD plug — no electrician, no dedicated circuit, no waiting on an install date. Place it on a firm, level surface, fill, plug in, and you're dialling in your temperature from day one.